DENSO SPARK PLUG IK31

Denso Iridium Power Spark Plug IK31 / 5321 Replaces 067700-9220 OE158

Low required voltage and a high ignitability, resulting in less misfiring and no spark which dramatically improves combustion. Significantly improved combustion enables engine output to increase.The power produced by the 0.4mm electrode is unmatched by any other plugs.The excellent ignitability of Iridium Powers 0.4mm fine electrode draws out much more performance from the engine and tests show fuel consumption improves by around 5%.

Denso Specifications

 

 

  • Low required voltage
  • Better acceleration response and operational stability
  • Lower fuel consumption
  • Longer lifetime
  • DIMENSIONS:
  • Height (mm): 43
  • Width (mm): 24.5
  • Length (mm): 85

If you are unsure as to whether this is the correct part for your vehicle, please don't hesitate to contact us. Alternatively please use the cross reference table above.

  • 0.4 mm iridium center electrode: world’s smallest diameter that maximizes firing potential
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode
  • Increased performance with World’s smallest Iridium Center Electrode (0.4mm). To increase ignitability, the important point is to let the flame kernel produced by the spark to grow unobstructed. Normally, this can be accomplished by widening the spark gap. However, this causes spark voltage to increase, which has the opposite effect. Iridium Power uses DENSO’s patented U-Groove ground electrode to achieve maximum ignitability while minimizing required voltage.

     
  • Treaddiameter: 14mm
  • Threadreach: 19mm
  • Seattype: flat
  • Hexsize: 16mm
  • Tipconfiguration: non projected
  • Construction: 0,4mm Iridium
  • Terminaltype:
Part Number IK31
Stock Number IK31
Barcode 0042511053212
Manufacturer Denso
Reach 19mm (3/4")
Terminal Type M4 Thread
Diameter 14mm
Seal Type Gasket Seat
Electrode Material Iridium Power
Projection Type Projected
Pack Size 1 Single Unit
Resistor Yes
Tip Configuration Single Electrode
Hex Spanner Size 16mm (5/8")
Før pris: Ikke medlem: 239,- NOK
Kun: 239,- NOK

SKU: KSRDENSO IK31

Del produkt på

  • Produktinformasjon

Meget fin tennplug for høye effektutak.brukes i Audi.Cosworth,volvo,2jz.M50.Med flere

skal du ha høy effekt så er dette en meget bra plugg.tilsvarer BoschF5CS og NGK9

 

 

             0.4 mm iridium center electrode: world’s smallest diameter that maximizes firing potential

  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode
  • Increased performance with World’s smallest Iridium Center Electrode (0.4mm). To increase ignitability, the important point is to let the flame kernel produced by the spark to grow unobstructed. Normally, this can be accomplished by widening the spark gap. However, this causes spark voltage to increase, which has the opposite effect. Iridium Power uses DENSO’s patented U-Groove ground electrode to achieve maximum ignitability while minimizing required voltage.

    Denso Iridium Power Spark Plug IK31 / 5321 Replaces 067700-9220 OE158

    Low required voltage and a high ignitability, resulting in less misfiring and no spark which dramatically improves combustion. Significantly improved combustion enables engine output to increase.The power produced by the 0.4mm electrode is unmatched by any other plugs.The excellent ignitability of Iridium Powers 0.4mm fine electrode draws out much more performance from the engine and tests show fuel consumption improves by around 5%.

    Denso Specifications

     

     

  • Low required voltage
  • Better acceleration response and operational stability
  • Lower fuel consumption
  • Longer lifetime
  • DIMENSIONS:
  • Height (mm): 43
  • Width (mm): 24.5
  • Length (mm): 85
  • If you are unsure as to whether this is the correct part for your vehicle, please don't hesitate to contact us. Alternatively please use the cross reference table above.

  • 0.4 mm iridium center electrode: world’s smallest diameter that maximizes firing potential
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode
  • Increased performance with World’s smallest Iridium Center Electrode (0.4mm). To increase ignitability, the important point is to let the flame kernel produced by the spark to grow unobstructed. Normally, this can be accomplished by widening the spark gap. However, this causes spark voltage to increase, which has the opposite effect. Iridium Power uses DENSO’s patented U-Groove ground electrode to achieve maximum ignitability while minimizing required voltage.

     
  • Treaddiameter: 14mm
  • Threadreach: 19mm
  • Seattype: flat
  • Hexsize: 16mm
  • Tipconfiguration: non projected
  • Construction: 0,4mm Iridium
  • Terminaltype:
  • Part Number IK31
    Stock Number IK31
    Barcode 0042511053212
    Manufacturer Denso
    Reach 19mm (3/4")
    Terminal Type M4 Thread
    Diameter 14mm
    Seal Type Gasket Seat
    Electrode Material Iridium Power
    Projection Type Projected
    Pack Size 1 Single Unit
    Resistor Yes
    Tip Configuration Single Electrode
    Hex Spanner Size 16mm (5/8")